If required, to assist in designing a cooling system, create a datum plane parallel to an existing plane, or to a plane defined by selected entities.
Important: Make sure that the required assembly is activated before using this operation.
When you enter this function
- the Assembly
Tree displays a new cooling
part
- the Feature Tree displays the
cooling object.
Pick a reference face to define the plane.
Use the Offset option to position the plane to where you want to create the cooling channels.
Press OK 
or Apply
in the Feature
Guide to complete the function.
The plane is created.
Note: The datum plane is created in the active assembly.
The Feature Tree now contains the Parallel Plane.
