|This task shows how to insert a Counterboring
operation in the program.
To create the operation you must define:
document, then select the desired
Make the Manufacturing Program current in the specification tree.
A Counterboring entity along with a default tool is added to the program.
The Counterboring dialog box appears directly at the Geometry tab page .
|2.||Select the red
hole depth representation then select hole geometry in the 3D window.
Just double click to end your selection.
|3.||If needed, you can invert the tool axis direction by selecting the axis representation in the sensitive icon.|
Strategy tab page
and specify the following machining
The other parameters are optional in this case.
|A tool is proposed
by default when you want to create a machining operation.
Feeds and Speeds tab page
to specify the feedrates and spindle speeds for the operation.
Note that in the toolpath represented in the strategy page, tool motion is at:
|6.||If you want to specify approach and retract motion for the operation, select the Macros tab page to specify the desired transition paths. The general procedure for this is described in Define Macros of an Axial Machining Operation.|
|Before accepting the operation, you should check its validity by replaying the tool path.|
|7.||Click OK to create the operation.|
|Example of output
If your PP table is customized with the following statement for Counterboring operations:
A typical NC data output is as follows:
You can use Edit Cycle to edit or choose output syntaxes. For more information please refer to Editing Cycle Syntaxes in Axial Machining Operations.
The parameters available for PP word syntaxes for this type of operation are described in the NC_COUNTERBORING section of the Manufacturing Infrastructure User's Guide.