| xPC Target | |
www.kxcad.net Home > CAE Software Index > MATLAB Index >
Condor PCI-1553 Remote Terminal (RT) Receive
xPC Target Library for MIL-STD-1553
Your model might have multiple Remote Terminal Receive blocks. To help you locate a particular block, the Remote Terminal Receive block displays the number and address parameters.
The block display has the format
remote terminal-R-subaddress-number of words
Remote terminal — Is the Remote Terminal parameter
R — Indicates receive command
Subaddress — Is the Sub address parameter
Number of words — Is the Number of words to receive parameter
A receive command for RT 1, sub address 3 to receive 2 words has the layout 1-R-3-2.
From the list, select from 1 or 2. This is the channel for this command stream. Select this value from the available channels on the board.
From the list, choose a Remote Terminal from 1 to 31. Select the Remote Terminal number for this message.
From the list, choose a subaddress from 1 to 31. Select the sub address for this message.
Enter the number of 16 bit integers to receive as the data part of this message. This number must be between 1 and 32. The output data vector will have this same vector width.
Note that if this Remote Terminal or subaddress might be sent messages with different lengths, specify the longest message length for this parameter. You must determine how much is significant from content or some other means.
Enter the base sample time or a multiple of the base sample time.
If only one board of this type is in the target PC, enter
-1
to automatically locate the board.
If two or more boards of this type are in the target PC, enter the bus number and the PCI slot number of the board associated with this driver block. Use the format [BusNumber, SlotNumber]. To determine the bus number and the PCI slot number, type
getxpcpci
| | Condor PCI-1553 RT Initialize | Condor PCI-1553 RT Send | |
© 1984-2007 The MathWorks, Inc. • Terms of Use • Patents • Trademarks • Acknowledgments