You can use Circular Pattern to create multiple instances of one or more features that you can space uniformly around an axis.

1.

Click   button on the toolbar, or click Tools > Sketch Tools > Circular Pattern.

2.

Enter the values for Base X and Base Y. Base X is the position of pattern from origin in X direction. Base Y is the position of pattern from origin in Y direction.

3.

Enter the value for No. of Copy. The specified number of entities will be created in the pattern.

4.

Enter the value for Total Angle. Pattern will be created in the specified angle about the axis.

<Pattern created with Angle 180>      <Pattern created with Angle 360>

5.

Enable Reverse to create the pattern in reverse direction. Click OK to create the pattern.

·   Entities – Entity that need to be patterned.

·   Base X – Base Y is the position of the pattern from origin in X direction.

·   Base Y – Base Y is the position of the pattern from origin in Y direction.

·   No. of Instances – The number of entities that should be copied.

·   Total Angle – Total angle in which the pattern should be created.

·   Reverse – You can enable this option to create the pattern in the reverse direction.