(1)  File > Capture Screen

When PIP (View > Zoom > PIP) screen is present in the model and File > Capture Screen was executed, the resulting image comes with a shadow which is not correct. This bug has been fixed now.

 

(2)  File > Capture Screen

When the image is captured using File > Capture Screen, the shadow of main menu appears in the captured image. This problem has been fixed now.

(3)  Undo does not work correctly

In the Mesh mode, start any command (e.g. Tools > Mesh Tools > Refit). Delete some poly-faces in mesh. Cancel the existing command. Click Edit > Undo to undo the deletion of poly-faces. It does not work. This bug has been fixed now.

Go to the Mesh mode. Select poly-vertices or poly-faces which are colored. Delete the poly-faces/poly-vertices. Click Edit > Undo. This does not work correctly. This bug has been fixed now.

 

(4)  Copy/Paste operations

Go to the Mesh mode. Copy poly-faces. Paste the selected poly-faces. Delete the copied poly-faces. If you do similar operations for a number of times, memory leakage happens. This bug has been fixed now.

 

(5)  Problems in Enlarge for Body

Select a body face or body edge. Use Enlarge command. It does not work correctly. This problem has been fixed now.

 

(6)  Problem with Edit mode of Numbers

Double click the numbers (for example say dimension) displayed in the view to change it to the edit mode. Now use Alt + tab to move to the other applications. When you come back to XOR again, the edit mode of the numbers is terminated.

 

(7)  Problems in the edit controls

Previously, you can use minus (-) in the edit controls in between the numbers, which must not be allowed. Now you can use minus only before the number (-5), not in between the numbers (ex: 10-3).

 

(8)  Problems in ProfileView.

When variable fillet is applied to some entity, you can see the profile view in the bottom. Continuously zoom out the profile view. After some time the profile view appears up side down. This problem has been fixed now.

 

(9)  Problems in Model tree display

Make a feature for the solid body. The created feature is displayed in both feature tree and model tree. Now make another feature. The model tree and feature tree are updated to display the new feature. Now Rollback to the previous feature. The feature in model tree is not updated. This problem has been fixed now.

 

(10) No warning message

Create a surface extrude from a sketch. Delete the sketch. There is no warning message which says that extruded surface also will be deleted. This bug has been fixed now.

 

(11) Edit control disappear after View > Multiport

When you are in edit mode of edit control (ex: Dimension) and change the view port to a multi port, the edit widget disappears unlike the previous version of rapidformXOR.

 

(12) Tools > Mesh Tools > Refit

Previously, when one or more holes were present in mesh data, creating surface using Tools > Mesh Tools > Refit will make the surface in a bad shape because of the bad mesh data around the holes. This bug has been fixed now.

 

(13) Tools > Mesh Tools > Decimate

Using the command Tools > Mesh Tools > Decimate sometimes crashes. This problem has been fixed now.

 

(14) Problems in Enlarge, Shrink commands

Go to the Mesh mode. Select the region filter. Select the region. When the Poly-Face filter is enabled, Select some poly-faces. Use enlarge or shrink commands. This does not work correctly. This problem has been fixed now.

 

(15) Problems in Angular Dimension

When you define the angular dimension between two lines, and if you move the lines left and right, the angular dimension appears very strangely. This problem has been fixed now.

 

(16) Application Crash

Go to the Region mode. Click Auto Segment to auto segment the region. Go to the Mesh mode and remove some poly-faces. Now click Tools > Mesh Tools > Global Remesh. The application crashes. This bug has been fixed now.

(17) Sketch grid not in center

In Mesh Sketch mode, in the mesh sketch setup when rotational method was selected to create the section, the sketch grid is not in center. This problem has been fixed now.

 

(18) Cannot select manipulator

Go to Mesh Sketch mode. In the sketch set up, select the method as rotational method. It is not possible to select the manipulator and move. This bug has been fixed now.

 

(19) Tools > 3D Sketch Entities > Section

In Tools > 3D Sketch Entities > Section command select the option as Select Plane. Cancel the command. Now restart the section command again. Base Planes could not be selected. This problem has been fixed now.

 

(20) Surface Extrude and Undo

Create a surface extrude from a sketch. Delete the sketch. Click Edit > Undo to undo the last operation. Undo does not work. This bug has been fixed.

 

(21) Insert > Solid > Hollow

In Insert > Solid > Hollow command, enable Multi-Thickness Faces option. Select multiple faces. Now remove the selected faces and disable the option. User is not able to select the first face that is selected. This problem has been fixed now.

 

(22) Tools > Mesh Tools > Decimate

Large Data Mode option should be enabled for large data meshes. Even the mesh is large, this option is disabled some times. This bug has been fixed now.

 

(23) Insert > Solid > Thicken

Import a solid/surface body through IGES file format. Apply Thicken command using Insert > Solid > Thicken. Delete the solid body after thicken. There is no error message displayed. This problem has been fixed now.

 

(24) Insert > Modeling Feature > Move Face.

When this command is executed, faces appear in feature tree. But the direction entity is not displayed. This problem has been fixed now.

 

(25) Problem in model tree after extrude cut

Click Insert > Solid > Cut to cut the selected body. Complete the Cut command. The new feature cut is not displayed in model tree. This problem has been fixed now.

 

(26) Insert > Solid > Cut

Click Insert > Solid > Cut.  Select target bodies to cut and select a remaining body. The model might appear strange. This problem has been fixed now.

 

(27) Memory leak in Loft, Trim and Merge Feature

When Loft, Trim and Merge Feature is used for solid/surface, the memory usage increases. This leads to a memory leak. This bug has been fixed now.

 

(28) Problems in Fillet

When you apply fillet to the faces in the model, delete base face after filleting. The application crashes. This problem has been fixed now.

 

(29) Fillet for unselected edges.

Some times when you apply fillet to some edges, the fillet is applied to some unselected edges also. This problem has been fixed now.

 

(30) Accuracy Analyzer – Color

When Color is changed in Accuracy Analyzer, the change in color is not updated immediately. You have to close Accuracy Analyzer window and restart to see the effect. This problem has been fixed now.

 

(31) Accuracy Analyzer – Options not saved.

When you are in accuracy analyzer and change the options like Continuity. Save XOR file and exit. This change is not reflected when you reopen XOR. This bug has been fixed now.

 

(32) Insert > Surface > Mesh Fit / Boundary Fit

Make a body using Insert > Surface > Mesh Fit or Insert > Surface > Boundary Fit. Execute Edit > rebuild, Undo and Redo, Roll back, Roll Forward number of times. A memory leakage might happen. This bug has been fixed now.

 

(33) Problem with floating tree window

Keep the Feature tree view in floating condition. Terminate XOR and restart it again. There is no response and CPU slows down. This bug has been fixed now.

 

(34) Insert > Solid > Hollow

Execute Insert > Solid > Hollow command. Select the body. Now the Cancel button is inactivated after selecting the body. This problem has been fixed now.

 

(35) Insert > Solid > Loft

In Insert > Solid > Loft function, if the guide marker is behind the sketch region, guide marker cannot be selected. This problem has been fixed now.

 

(36) Insert > Solid > Loft

In Insert > Solid > Loft, change the End Constraint to Direction Vector. Turn off the option Use Same Tangent Length To All Vertices. Change the End Constraint to None. Change it again to Direction Vector. Tangent Length option is disabled even though the Use Same Tangent Length To All Vertices option is enabled. This bug has been fixed now.

 

(37) Insert > Solid > Loft

If the Constraint is selected as direction vector then only the widget should be displayed. But the widget is displayed even before selecting the constraint as direction vector. This problem has been fixed now.

 

(38) Insert > Solid > Thicken

In mesh mode, for Insert > Solid > thicken command, same result is achieved for both Direction1 and Direction 2. This bug has been fixed now.

 

(39) 3ds Exporting

When you export several mesh data as 3ds format and import it into rapidformXOR again, the application might crash. This bug has been fixed now.

 

(40) Accuracy Analyzer

Even you change feature in the Feature Tree, the changed entity is not applied in Accuracy Analyzer. Therefore you can not change Disable to Enable in the Accuracy Analyzer bar. This bug has been fixed now.

 

(41) Sketch Option

While you select a Sketch entity in the Sketch or Mesh Sketch mode, Enable Snap and Enable Polyline Snap become disable. This bug has been fixed now.

 

(42) xrl Open

When you open xrl file which includes Ref.Geometry with parents, these parents are not registered at the sub-location of Ref.Geometry. This bug has been fixed now.

 

(43) Ref.Geometry from Extract Method

When you edit Ref.Geometry which is created by the Extract method, the display of fitting points does not disappeared. This bug has been fixed now.

 

(44) Sketch Entity from Body Point

When you create entities snap on body point or convert body point, these entities are not updated. This bug has been fixed now.

 

(45) Mouse Cursor

Occasionally an icon of mouse cursor is not changed correctly when you move a mouse from zoom pip window to menu bar. This bug has been fixed now.