Using this command, you can hollow a solid feature.

1.

Click  button on the toolbar, or click Insert > Solid > Hollow.

2.

Select the body to Hollow and bottom face to Remove Faces. Enter the Depth.

3.

Click OK.

·   Hollow – Select the body to hollow.

·   Depth –Value for the depth of hollow feature.

·   Hollow Outward – If this option is enabled, hollow is made in outward direction.

·   Remove Faces – Select the Faces that should be removed while making hollow body.

·   Multi-Thickness Faces – If this option is enabled, you can specify the thickness of the faces.