|
Make a curve or surface open or closed |
|
To...
|
Do this
|
|---|---|
| Join the ends of a curve together to make a periodic (closed) curve. |
Select an open curve and choose Edit Curves > Open/Close Curves. |
| Make a periodic (closed) curve non-periodic. |
Select the start CV (the CV that looks like a hollow box) and choose Edit Curves > Detach Curves. |
| Separate the ends of a periodic (closed) curve. |
Select a closed curve and choose Edit Curves > Open/Close Curves. Maya opens the curve and reshapes it so its endpoints are separated. |
| Join edges of a surface to make a periodic (closed) surface. |
Select an open surface and choose Edit NURBS > Open/Close Surfaces > Click U, V, or Both to choose which edges to join. |
| Move the seam of a closed (periodic) curve. |
Select an curve point on the curve and choose Edit Curves > Move Seam. The seam will move to the edit point nearest your selected point. |
| Move the seam of a closed (periodic) surface. |
Select an isoparm on the surface and choose Edit NURBS > Move Seam. The seam will move to the patch isoparm nearest your selected isoparm. |
| Change the direction in which a surface is periodic. |
Select the surface and choose Edit NURBS > Open/Close Surfaces > Click U, V, or Both to choose which edges are periodic. |
.
Related topics
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|