View/edit panel component connection sequence
This tool allows you to view and rearrange the sequencing of all panel footprint components that share a common set of Level 1-4 level code assignments. This coding, when present, influences the way that AutoCAD Electrical calculates the wire connection from/to sequence. As it processes the schematic component representations and wiring, it checks for any coding found on the panel footprint and panel terminal strip representations. When present, it adjusts the from/to sequencing accordingly.
| Access: | |
|---|---|
| On the Panel Level/Sequencing toolbar, click the View/Edit Component Sequence tool. Select a footprint with a set of level codes assigned to it. Click Panel Layout |
The components that have level codes matching the picked footprint are displayed in the list box in the order they will be inserted. This includes panel footprint components that might appear on drawings other than the active drawing (marked with "*" in the list). To modify the order, select an entry in the list, then select Move Up or Move Down in the list. Multiple selection is supported.
Move Up | Moves the selected component(s) up one spot in the list. |
Move Down | Moves the selected component(s) down one spot in the list. |
Pick Mode | Defines the sequence by actual picks at each component. Pick near each component in the order of how you want the sequence to proceed from component to component. Picking is limited to components on the active drawing. |
Remove All | Removes the component sequence information from all listed components. |
OK-new | Saves the sequence assignments and writes them out to the panel footprint representations. The data is stored on attribute WDLEV or as extended entity data (xdata) on the symbol if the target attribute is not available. |
