Resequence panel item numbers
This tool assigns or resequences item number assignments on a drawing or project. This extracts all panel components and nameplates and resequences their item numbers starting at the value you provide. Resequencing is based on the main MFG/CAT/ASSYCODE value combination. Additional multi-catalog numbers on a specific component are ignored. Only the main part number combination is used to group similar components together under a common item number.
| Access: | |
|---|---|
| Click the arrow on the Miscellaneous Panel Tools tool to access the Resequence Item Numbers tool. From the Panel Layout menu, select Miscellaneous
Panel Tools |
Select the beginning item number to use. This processes the drawing or project drawing set and assigns incrementing item numbers for each new part number. Any old item number assignments are overwritten with new ones, existing balloons are updated, and repeated part numbers are assigned the same item number, even when running project-wide.
Start | Specifies the beginning number to use. Add leading zeros if desired (ex: "001" instead of "1") to enable better report sorting on item number. |
Drawings to Process | Specifies to process the data for the active drawing or the entire project. If you select Project, you can select which drawings to process from within the project. If you select Active Drawing, other drawings are not checked for existing item number assignments. |
