Using Programming Languages other than VBA

Sub Example_AltToleranceSuppressTrailingZeros()
   ' This example creates an aligned dimension in model space and
   ' uses AltToleranceSuppressTrailingZeros to toggle the display of trailing zeros
   ' in the alternate dimension tolerance display

    Dim dimObj As AcadDimAligned
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    
    ' Define the dimension
    point1(0) = 5: point1(1) = 5: point1(2) = 0
    point2(0) = 7: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    
    ' Set up alternate unit tolerance display
    dimObj.AltUnits = True
    dimObj.ToleranceDisplay = acTolLimits
    
    ThisDrawing.Application.ZoomAll
    
Toggle:
    Select Case MsgBox("Press OK to toggle the display of trailing zeros in the alternate dimension tolerance", vbOKCancel)
        Case vbOK
            ' Toggle the display of trailing zeros for the alternate dimension tolerance value
            dimObj.AltToleranceSuppressTrailingZeros = Not (dimObj.AltToleranceSuppressTrailingZeros)
            ThisDrawing.Regen acAllViewports
        Case vbCancel
            Exit Sub
    End Select
    
    GoTo Toggle
End Sub



 

 
 Comments? 

 

  
Return to Autodesk Index









Your Ad Here