Add Text and Blocks to Tables

Add Text and Blocks to Tables

Add Text and Blocks to Tables

 

AutoCAD 2008 User's Guide > Annotate Drawings > Tables > Add Text and Blocks to Tables > 

Add Text and Blocks to Tables

Concept

Procedure

Quick Reference

To insert a block in a table cell

1. On the Table toolbar, click Insert Block.
2. In the Insert dialog box, select a block from the list of blocks in the drawing, or click Browse to find a block in another drawing.
3. Specify the following properties for the block:
   • Cell Alignment. Specifies alignment for the block in the table cell. The block is middle-, top-, or bottom-aligned with respect to the top and bottom borders of the cell. The block is center-, left-, or right-aligned with respect to the left and right borders of the cell.
   • Scale. Specifies the scale for the block reference. Enter a value or select AutoFit to scale the block to fit in the selected cell.
   • Rotation Angle. Specifies a rotation angle for the block.
4. Click OK.

   If the block has attributes attached, the Edit Attributes dialog box is displayed.

 Toolbar: Table

 Shortcut menu: Select and right-click a cell. Click InsertBlock.