Create a Solid Wedge

Up a level to ..

Create a Solid Wedge

 

AutoCAD 2008 User's Guide > Work with 3D Models > Create 3D Models > Create 3D Solids and Surfaces > Create 3D Solid Primitives > Create a Solid Wedge > 

Create a Solid Wedge

Concept

Procedure

Quick Reference

To create a solid wedge based on a center point, corner of base, and height

1. Click Draw menu Modeling Wedge.At the Command prompt, enter wedge.
2. Select the Center option and specify the center point of the base.
3. Specify one of the corners of the base from the center point to calculate both length and width, or use the Length option if desired and specify the length and then width from the center point of the base.
4. Specify the height of the wedge.

 Toolbar: Modeling 

 Command entry: WEDGE

 Dashboard: 3D Make panel, Wedge