You can set device-specific configurations in the Autodesk Plotter Manager.
Hewlett-Packard DesignJet plotters are supported by a Windows system printer driver developed by Hewlett-Packard. Visit http://hp.com/go/designjet to check for the latest HP DesignJet drivers.
Hewlett-Packard HP-GL plotters are supported through an RS-232C serial I/O port.
The HP-GL/2 nonsystem driver supports a variety of HP-GL/2 pen plotters and ink jet plotters.
Although the primary configuration choice for Océ plotters is through a parallel port, Océ plotters can be supported through an RS-232C serial I/O port.
It is highly recommended that you use the Xerox HDI driver.
If you are using a CalComp plotter, you can use the Windows system printer.
If you are using a newer Houston Instruments plotter, use the generic HP-GL or HP-GL/2 HDI drivers and configure your plotter in HP-GL or HP-GL/2 emulation mode.
With the HDI system printer driver, you can use the plotter or printer you have configured with Windows.
