GRIDDISPLAY
| Type: | Bitcode |
| Saved in: | Drawing |
| Initial value: | 2 |
Controls the display behavior and display limits of the grid.
The setting is stored as a bitcode using the sum of the following values:
0 | Restricts the grid to the area specified by the LIMITS command |
1 | Does not restrict the grid to the area specified by the LIMITS command |
2 | Turns on adaptive grid display, which limits the density of the grid when zoomed out |
4 | If the grid is set to adaptive display and when zoomed in, generates additional, more closely spaced grid lines in the same proportion as the intervals of the major grid lines |
8 | Changes the grid plane to follow the XY plane of the dynamic UCS. |
