Controls the aspect ratio of faceting for cylindrical and conic solids. A setting of 1 increases the density of the mesh to improve the quality of rendered and shaded models.
Adjusts the smoothness of shaded objects and objects with hidden lines removed. Valid values are from 0.01 to 10.0.
Controls whether fields are displayed with a gray background. The background is not plotted.
Controls how fields are updated. The setting is stored as a bitcode using the sum of the following values:
Suppresses display of file navigation dialog boxes.
Stores the current fillet radius.
Specifies whether hatches and fills, two-dimensional solids, and wide polylines are filled in.
Specifies the alternate font to be used when the specified font file cannot be located. When a drawing file with a defined text style is opened and an alternate font is not specified, the Alternate Font dialog box is displayed.
Specifies the font mapping file to be used. A font mapping file contains one font mapping per line; the original font used in the drawing and the font to be substituted for it are separated by a semicolon (;). For example, to substitute the Times TrueType font for the Roman font, the line in the mapping file would read as follows:
Stores the front clipping plane offset from the target plane for the current viewport, in drawing units. Meaningful only if the front clipping and front clip not at eye bitcodes in VIEWMODE are on. The FRONTZ value is the last front clipping plane value set current with the CAMERA, DVIEW, or 3DCLIP command. The distance of the front clipping plane from the camera point is found by subtracting FRONTZ from the camera-to-target distance.
Indicates whether the current drawing is partially open.
Controls whether the full path of the drawing file is sent to the plot spooler.
