Release 11.0 Documentation for ANSYS
www.kxcad.net Home > CAE Index > ANSYS Index > Release 11.0 Documentation for ANSYS
TBTEMP, TEMP, KMOD
Defines a temperature for the data table.
MP ME ST PR PRN <> <> <> <> <> <> PP <>
Temperature value (defaults to 0.0 if KMOD is blank).
If blank, TEMP defines a new temperature. If an integer, 1 to NTEMP (from the TB command), modify that previously defined temperature to the TEMP value, unless TEMP is blank, then that previously defined temperature is reactivated. Use TBLIST to list temperatures and data. The next TBDATA or TBPT commands also add or change the data at this temperature. If KMOD = CRIT (and TEMP is blank), the next TBDATA values are failure criteria keys as described for SOLID46, SHELL91, SHELL99, and SOLID191. If KMOD = STRAIN (and TEMP is blank), the next TBDATA values are strains as described for the MKIN property option (see Data Tables - Implicit Analysis of the Elements Reference).
Defines a temperature to be associated with the data on the subsequent TBPT or TBDATA commands. The temperature remains active until the next TBTEMP command is input. Data values must be defined with the temperatures in ascending order. Temperatures previously associated with a data table may also be modified.
This command is also valid in SOLUTION.