| File |
| Deep Simply-Supported Beam |
| Define a constraint: |
| Define a response |
| Define an Objective |
| Define Constraints |
| Define design variable links: |
| Define Design Variables |
| Define design variables for gauge (shell thickness) optimization: |
| Define design variables for shape optimization: |
| Define design variables for size optimization: |
| Define design variables for topography optimization: |
| Define design variables for topology optimization using solids: |
| Define Responses |
| Define the objective function: |
| Defining an Optimization Problem |
| Defining Free-shape Design Regions |
| Defining Geometric and Material Properties |
| Defining I/O Options |
| Defining Loads and Boundary Conditions |
| delay |
| density |
| densres |
| deqatn |
| desglb |
| deshis |
| Design Concept for a Structural C-clip - OS-2000 |
| Design Concept for a Structural C-clip with Minimum Member Size Control - OS-2005 |
| Design Concept for an Automotive Control Arm - OS-2010 |
| Design Constraints |
| Design Variables |
| Design Variables for Shape Optimization |
| Design Variables for Size Optimization |
| Design Variables for Topography Optimization |
| Design Variables for Topology Optimization |
| DESOBJ |
| dessub |
| desvar |
| dim |
| Direct Frequency Response Analysis of a Flat Plate - OS-1100 |
| Direct Matrix Approach |
| Direct Transient Dynamic Analysis of a Bracket - OS-1120 |
| Discrete Design Variables |
| Discrete Size Optimization of a Welded Bracket - OS-4030 |
| Discretizing the Geometry of the Structure |
| displacement |
| dlink |
| dlink2 |
| DLOAD - Bulk Data Entry |
| DLOAD (Subcase Information Entry) |
| dmig |
| dmigname |
| dobjref |
| Does the PC page file size affect the elapsed time for an OptiStruct job? |
| doptprm |
| DOPTPRM, CHECKER |
| DOPTPRM, DDVOPT |
| DOPTPRM, DELSHP |
| DOPTPRM, DELSIZ |
| DOPTPRM, DELTOP |
| DOPTPRM, DESMAX or MAXITER |
| DOPTPRM, DISCRETE |
| DOPTPRM, DISCRT1D |
| DOPTPRM, GBUCK |
| DOPTPRM, MATINIT |
| DOPTPRM, MAX_BUCK |
| DOPTPRM, MINDENS |
| DOPTPRM, MINDIM |
| DOPTPRM, MINMETH (Not Supported in 8.0 or Later Versions) |
| DOPTPRM, MMCHECK |
| DOPTPRM, OBJTOL or CONV1 |
| DOPTPRM, TMINPLY |
| dphase |
| Draw Direction Constraints for Topology Optimization |
| dresp1 |
| DRESP1 - Center of Gravity and Moments of Inertia Item Codes |
| DRESP1 - Frequency Response Displacement, Velocity, and Acceleration Item Codes |
| DRESP1 - Frequency Response Force Item Codes |
| DRESP1 - Frequency Response Stress/Strain Item Codes |
| DRESP1 - Responses and Attributes |
| DRESP1 - Static Failure Item Codes for Composites |