MOTNGC – Grid Point Motion vs. Time Curve for Multi-body Solution Sequence
Defines a grid point motion vs. time by specifying a curve.
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
(8) |
(9) |
(10) |
|
MOTNGC |
SID |
G1 |
C1 |
G2 |
CVID |
INT |
EID |
|
|
|
|
D0 |
V0 |
|
|
|
|
|
|
|
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
(8) |
(9) |
(10) |
|
MOTNGC |
3 |
345 |
3 |
|
1 |
AKIMA |
2 |
|
|
|
Field |
Contents |
|
SID |
Load set identification number. (Integer > 0) |
|
G1 |
Grid point identification number. (Integer > 0) |
|
C1 |
Component number (Integer 1 through 18). The component refers to the coordinate system referenced by the grid point G1. |
|
G2 |
Grid point identification number to define relative motion. (Integer > 0 or blank) |
|
CVID |
Set identification number of the MBCRV entry that gives the motion vs. time. (Integer > 0) |
|
INT |
Interpolation type (Character: LINEAR, CUBIC, AKIMA). (Default = AKIMA) |
|
EID |
Set identification number of the MBVAR for the independent variable expression. (Integer > 0 or blank; Default = TIME) |
|
D0 |
Initial displacement if motion data is of type velocity or acceleration, ignored otherwise. |
|
V0 |
Initial velocity if motion data type is acceleration, ignored otherwise. |
Comments
If G1 and G2 are defined, the motion is a relative motion between the two grid points; if G2 is blank, absolute motion of G1 is defined.
The component numbers 1, 2, 3 belong to the three displacement directions; 4, 5, 6 to the three rotations; 7, 8, 9 to the three translational velocities; and 10, 11, 12 to the three angular velocities.
Go To
Guidelines for Bulk Data Entries