Centerpoint Arc

Use the Centerpoint Arc tool to create an arc from a centerpoint, a start point, and an end point.

To create a centerpoint arc:

1. In an open sketch, click Centerpoint Arc on the Sketch toolbar, or click Tools, Sketch Entities, Centerpoint Arc.

   The pointer changes to .

2. Click in the graphics area to place the start point of the arc, then click where you want to place the end point of the arc.

3. Drag to set the angle and the radius of the arc.

4. Click to place the arc.

5. Set the properties in the Arc PropertyManager.

6. Click OK .

To change the properties of the arc:

In an open sketch, select the arc and edit the properties in the Arc PropertyManager.

Return SolidWorks Help Index