for selected configurations as follows:You can suppress and unsuppress
(turn off and on) lights in Lights and
Cameras for selected configurations as follows:
Right-click a light and select On or Off to turn it on or off in the active configuration only.
Right-click
a light and select Properties.
In the Lighting
PropertyManager, click On/Off
and select This configuration,
All
configurations,
or Specify
configuration.
You can also control lights in a design table.
The column header in a design table for controlling lights uses this syntax:
$STATE@<lighting name>
For example, to control the suppression state of a directional light, the column heading syntax is $STATE@Directional1.
The column header
is not
case sensitive.
In the table body cells, type S for suppressed or U for unsuppressed. If a cell is left blank, the default is Unsuppressed.
Example of a design table that controls lights:
