Click Exit Sketch
on the Sketch toolbar.
The Revolve PropertyManager
appears.
Now that you created the sketch profile, you revolve the profile around the centerline to create the revolve feature.
Click Exit Sketch
on the Sketch toolbar.
The Revolve PropertyManager
appears.
If you move the pointer over
a box or an icon in the PropertyManager, a tooltip appears with the name
of the box or icon.
Under Revolve Parameters:
Select the long vertical line in the sketch
for Axis of Revolution 
.
Select One-Direction in Revolve Type.
Set Angle
to 360.
Click OK 
.
Save the part as Cstick.sldprt.
