(Software Cycle)
CYCLE/CSINK,d,a,f,IPM IPR,c[,LOCK,i]
Rapid to clearance c.
Advance at feedrate f to depth z.
Depth z is calculated from the required diameter d and included angle a.
Dwell.
Retract at rapid rate to clearance c.
LOCK,i specifies the dwell time. Initially a value of 2 seconds is assumed.
Example:
Input:
$$ DIAMETER = .5, ANGLE = 90
CYCLE/CSINK,0.5,90.0,10.0,IPM,.1
GOTO/0,0
Machine Data File Output:
N4G00Z.1$
N5G01X0.0Y0.0Z-.25F10.$ $$(Calculated Z depth)
N6G04F2.0$
N7G00Z.1$
SPSTCMND.chm