Constraint >> Perpendicular

• Constraint >> Perpendicular command makes a selected Ref.Geometry(or Surface) perpendicular to another selected Ref.Geometry(or Surface).

Step

Execute Constraint >> Perpendicular command as follows:

1. Select Constraint >> Perpendicular from the menu or click the corresponding icon on the Feature toolbar.

2. Right-click to pop up this shortcut menu.

3. Select Pick Surfaces, then left-click to pick two surfaces; or select Pick Surface and Reference, then left-click to pick a surface first, then a reference geometry; or select Pick References, then left-click to pick two reference geometries.

 

Result  

• The result is the first selected geometry is made perpendicular to the second selected one.

Before applying Perpendicular Constraint	After applying Perpendicular Constraint