Color >> Match Color
Color >> Match Color synchronize color temperature of two shells.
Step
- Execute Color >> Match Color command as follows:
- 1. Select Color >> Match Color command from the menu or click the corresponding icon from the Color toolbar.
- 2. Select method of compensation HSV Method or RGB Method. then select sub option of color condition.
- 3. Click Set Match button and pick two shells. color of first picked shell will be compensated.
- 4. Workspace will be change like initial registration, pick point which is placed at same position in each shell.
- 5. After picking. On RMB menu, select Done.
- 6. According to number of picked points, Dialogue will show you change of color sample. With slide bar, You can check how all picked point is changed as below figure.
- Step of slide will be increased as number of picked point
- 8. Click Compensate button to compensate color temperature.
Result
Note
This commend is good for color scan data which are obtain from bad lighting condition.
If you are not satisfied with compensation result, Change some method and option than retry compensation.
For more information about HSV method, please refer to Color Workbench
