Build >> Register >> Fine

• After Build  >> Register  >> 2 Shells is applied, Build  >> Register  >> Fine command exactly matches all selected shells at the same time using the overlapped region found automatically. This command can be applied to a point cloud model.

Step   

Execute Build  >> Register  >> Fine command as follows:

1. Select Build  >> Register  >> Fine from the menu or click the corresponding  icon from the Build toolbar.

2. Select more than two shells to be aligned simultaneously. ( See Shell selection )
The color of the selected shell's bounding box changes to blue.

3. If a user clicks the right mouse button while executing this command, the following pop-up menu appears.

Select Pause to temporarily stop the current command and change to input ready state. Then, a user can use virtual trackball. A check mark appears in the front of Pause command in this state. Select Pause once more to resume the stopped command.

4. When a user selects more than two shells, Done on the right mouse pop-up menu is enabled. Select it to complete this operation.

5. If All on the pop-up menu is selected, a global registration process is performed on all the shells shown in the working window.