Access: Click
the 
icon, or select
Faces / Sweep from the main
menu or press Parting Surface
/ Sweep Face from the
Parting Guide. Sweep
also appears on the popup menu
if a curve, edge, sketch or contour is selected.
Sweep an edge or curve to a reference plane.
Required Step 1 
In this example, the circular face is swept to a face of the block.
Select a contour, curve, or edge.
Required Step 2 
Pick a face or plane as a reference. To set direction click the arrow origin.
Notes on Default Sweep Direction:
The face is swept to the reference plane. In the example below, toggling between the As Object/As Plane option is shown.
If this is the final result,
press OK 
or Apply 
in the Feature Guide to complete
the function.
Optional Step 1 
If you want to add a draft angle to the sweep, proceed to Optional Step 1.
When completed, the Sweep face will appear in the Feature Tree as follows:
