Access: Click
the 
icon, or select
Faces / Sweep from the main
menu or press Parting Surface
/ Sweep Face from the
Parting Guide. Sweep
also appears on the popup menu
if a curve, edge, sketch or contour is selected.
Sweep an edge or curve to the closest active object or face.
Required Step 1 
In this example, the orange object is active, and the yellow object is deactivated.
Select a contour, curve, or edge.
Required Step 2 
The sweep will extend to the closest active object, in this case, the orange object. You can click the arrow origin to set another direction.
Notes on Default Sweep Direction:
If this is the final result, press OK
or Apply 
in the Feature
Guide to complete the function.
Optional Step 1 
If you want to add a draft angle to the sweep, proceed to Optional Step 1.
When completed, the Sweep face will appear in the Feature Tree as follows:
