Remove volume material. Cutting is performed in horizontal layers.
|
|
Remove volume material. Cutting is performed in horizontal layers. |
For each layer, optimal machining strategy
is applied according to the layer geometry. Priority is given to air plunging.
Adaptive feed control is automatically applied, so a constant load
is maintained on the cutter at all times.
High speed milling strategies can be applied.
You can create a few concurrent Rough procedures (e.g. with different cutters)
and the remaining material is taken into consideration.
Volume Milling, Rough has the following sub-options:
|
|
Rough Parallel: Milling in which cutter passes are parallel when viewed from the Z direction. |
|
|
Rough Spiral: Milling performed in spiral motions. |
