Trim ejectors by the active faces - faces that belong to the active part.
|
Shaped Trim |
Flat Trim |
|
|
|
General Interaction
The following is the Feature Guide for Ejector Trim.
|
|
Remember: You can open the Feature Guide at any time on the graphic display area by right-clicking. |
Required Step 1 
: Pick the ejectors to be trimmed.
Required Step 2 
: Define the required trimming parameters.
Notes:
It is recommended to trim the ejectors and then create a pocket for them.
If you want to trim the ejector by the Fixed or Movable side, this means that the system looks for active faces in the Fixed or Movable side that will cut the selected ejector. Retainer Pins, for example, do not touch the active faces, so you have to pick the relevant face manually. Only ejectors (or any other objects) that touch the active faces will automatically be cut.
Detailed Interaction
See Options and Results.
