Note: Only one Electrode UCS feature per electrode can be created. If the Electrode UCS function is invoked after an Electrode UCS has been created, the function will be invoked in edit mode.
Required Step 1 
Pick an origin point for the Electrode UCS. Any point may be picked. This UCS is used as the electrode reference point for reports.
Once the point has been picked, the UCS is displayed. A Flip option rotates the UCS 180 degrees around the X axis.
|
1 |
2 |
|
|
|
Optional Step 1 
Rotate the UCS, if required, around the Z axis.
The available options are CS Rotation and None.
|
|
|
|
|
|
Optional Step 2 
Move the UCS, if required, by a delta value.
The available options are Delta Values and None.
|
|
|
|
|
|
Press exit
when finished. Press OK 
in the Feature
Guide to complete the function.
When completed, the Electrode UCS will appear in the Feature Tree as follows:
