Enables you to insert and embed external graphic files into existing drawings, frames and templates regardless of the active view. After inserting the file, the user can then move and resize the picture within the drawing, as required. It is recommended to avoid placing heavy pictures, since this may slow down system performance. This option is used for adding system logos or for displaying part pictures and so on.
The following options can be performed:
Moving Embedded Pictures
Resizing Embedded Pictures
Note: Since the pictures are embedded, there is no association between the original picture and embedded picture. Meaning, changes to the original picture will not be incorporated in the drawing, frame or template containing the embedded picture.
To embed graphic files:
From the displayed Insert Picture dialog, navigate and select the file to insert, and click Open. The picture is embedded in the drawing, as follows:
You can move embedded pictures using the 
toggle button.
To move embedded pictures:
Make
sure the toggle button is
displayed and then select one of the eight hot spots (one at each
corner and one at each mid-point).The selected hot spot is displayed in
red, as follows:
Move the picture by dragging the hot spot to the required location and then right-click the mouse button and select Close to exit the function.
You can resize embedded pictures using the 
toggle button.
To resize embedded pictures:
Make
sure the toggle button is
displayed and then select one of the eight hot spots (one at each
corner and one at each mid-point).The selected hot spot is displayed in
red, as follows:
Resize the picture by dragging the hot spot and then right-click the mouse button and select Close to exit the function.