Morph between two curves option will create swarf cuts morphing between two leading curves. This option is very suitable to machine steep areas for mould making. Please notice that the more accurate the guiding curves are to the real surface edges, the better this function works. So the best result would be an exact curve on the edge of the drive surface.
To select the first and second curve hit the buttons.
In this example you see a cut out of a wing. The black lines on the edge of the sides are the selected curves. As you can see the angle between these curve as well as the shape are totally different. The generated toolpath is approximated between the tilt curves and evenly spread at the thin and thick radius side.
Now compared to parallel cuts generated toolpath you see the big difference and the advantage of this function.
