Select a straight road, spline road, polyline road or cul-de-sac and click the Open Object 
edit button to access the Road Specification dialog.
Size the road using this section.
Width - Enter a width for the selected road. This option is not available for a cul-de-sac or non-centerline road.
Height - Enter a Height above the terrain for the selected road.
Flare - Roads can be flared at the Start and the End when they intersect with other road objects. Check one or both boxes.
Radius - Enter the flare radius.
Flaring is not available for culs-de-sac or non-centerline roads.
Has Curb - Check the box if you want the selected road to contain a curb.
Width - Enter a width value for the curb.
Height - Enter a Height value for the curb.
Cut Curb for Driveways and Sidewalks - Check this box to cut the curb for driveways and sidewalks.
Select Curb Profile - Click this button to select another curb profile.
Default Curb Profile - Click this button to use the default curb profile.
The Polyline tab lists the perimeter, area and volume of the road.
Use this tab to specify the angle between line segments that are used to draw the spline. Specifying a smaller angle makes the spline smoother. Specify a larger angle to draw the spline faster. See"Splines".
This tab is the same as the Selected Line tab of the Polyline Specification dialog. See "Selected Line Tab".
The Line Style tab of the Road Specification dialog is the same as the Line Style tab of the CAD Line Specification dialog. See "Line Specification Dialog".
The Fill Style tab of the Road Specification dialog is the same as the Fill Style tab of the CAD Polyline Specification dialog. See "Fill Style Tab".
Use this tab to select a material to apply to the road in 3D views. This material is not calculated in the Material List.
The Materials tab of the Road Specification dialog is the same as the Materials tab on many other specification dialogs. See "Materials Tab".
|
Chief Architect www.chiefarchitect.com |
