Select the masonry fireplace and click the Open Object 
edit button to display the Fireplace Specification dialog. Dimensions entered here must be whole inches. Fractions and decimals are not accepted.
Specify the dimensions of the fireplace and hearth.
Height - Specify the Height of the fireplace.
Width - Specify the Width of the fireplace.
Depth - Specify the Depth of the fireplace.
Hearth Depth - Specify the Hearth Depth. This is measured from the front of the fireplace out into the room. To eliminate the hearth altogether, enter a zero for this value.
Hearth Height - Specify the Hearth Height. This is the height of the hearth above the floor in that room.
Floor to Bottom - Enter the distance between the floor and the hearth bottom.
Suppress Dimensions - This option is available for fireplaces placed in walls. Check this box to turn off dimensions when this fireplace is selected.
No Firebox - Select the check box to eliminate the firebox from the fireplace. This is often used in the foundation plan to provide a solid matching base for the fireplace on the first floor.
Set the dimensions of the firebox.
Height/Width - Enter the height and width of the firebox.
Depth - Enter the depth of the firebox.
Offset - Enter the number of inches (or mm) to offset the firebox, measured from the center. A value of 0 centers the firebox in the fireplace.
Offset to Left/Right - Choose to offset the firebox to the left or to the right.
For information about the Layer tab, see "Layer Tab".
For information about the Materials tab, see "Materials Tab".
|
Chief Architect www.chiefarchitect.com |
