Availability Devices
(Menu) : Processors » Processor 4 » Reset

Description This command enables you to reset the currently focused MCU, in the Soft Devices chain of the Devices view.

Use This command is only available when the Devices view is configured to be 'Live'. To enter this mode, ensure that the Live option in the Devices view is enabled.

Also, ensure that the MCU that you wish to reset currently has the focus in the Soft Devices chain of the view. A device on the chain is given the focus simply by clicking on its corresponding icon in the chain.

After launching the command, the focused MCU will be reset and then placed in the Paused state. This is verified by the text above the device's icon changing from Running to Paused.

Notes Using this command will provides a total reset. Upon resuming operation, the code running in the MCU will begin execution from the start, as though it had just been freshly downloaded.

Operation of the MCU may be resumed by using the Continue command.

Process FpgaFlow:DeviceAction

Parameters Target=SoftDevice|Index=4|Action=ResetProcessor

Links About...
About...
About...
Choose and download to the current Hard device
Compile Program
Continue All Processors
Continue
Download Program
Download To All On-Chip Processors
Download To Device
Instrument...
Instrument...
Instrument...
Pause All Processors
Pause
Reset All Devices
Reset All Processors
Reset the currently selected Hard device
Reset
Single Step All Processors
Single-Step