www.kxcad.net Home > Electronic Index > Altium(Protel) Index
Description
Perform an autoroute of the PCB board, or a section of the PCB board, or by a specified net etc. You can also save the current routing process and exit from DXP.
Parameters
Action (Start,Net,Connection,Component,SingleComponent,Area,Room,SingleRoom,Setup,Stop,Reset,Pause,Restart, ExportRoutes)
SeeFile (RenameDSN). If Action=ExportRoutes, you need to specify the SeeFile parameter.
Notes
If SingleComponent value is specified for the Action parameter, you will need to specify the ContextObject which is usually Component
If SingleRoom value is specified for the Action parameter, you will need to specify the ContextObject which is usually Room.
Example
Process: PCB:AutoRoute
Parameters : Action=Setup