Availability Schematic Library Document
(Menu) : Tools » Mode » Normal
(Toolbar) : Mode

Description This command is used to change the graphical representation (mode) of the active component to Normal. This is the primary graphical representation of the component. All components have a Normal mode. Components may, in addition, have anywhere up to 255 Alternate graphical representations.

Use First ensure that the component whose graphical representation you wish to change is selected in the Components list of the SCH Library panel (and is therefore the active component in the main design window).

After launching the command, the graphical representation (mode) of the component will be changed to Normal. The associated graphics for this mode will appear in the main design window.

Notes The current graphical representation for the active component is denoted by an enabled 'tick' beside its entry in either the main or right-click menus (right-click in the main design window) or the Mode drop-down list in the Mode toolbar. The current mode is also shown in the Graphical region of the associated Component Properties dialog for the active component.

Process Sch:ToggleComponentDisplayMode

Parameters Action=Mode0

Links Add a display mode
Remove the current display mode
Toggle to next display mode
Toggle to previous display mode