Availability Schematic Library Document
(Menu) : Place » IEEE Symbols » Analog Signal In
(Toolbar) : Utilities

Description This command is used to place the indicated IEEE symbol on the current document.

IEEE symbols are used for representing logic functions or devices. These symbols enable users to understand the logic characteristics of these functions or devices without requiring specific knowledge of their internal characteristics.

Use After launching the command, the cursor will change to a crosshair and you will enter placement mode. The IEEE symbol will appear floating on the cursor. Simply position the cursor as required and click or press ENTER, to place the symbol. Continue placing further symbols or right-click or press ESC to exit placement mode.

Press TAB while in placement mode to bring up the IEEE Symbol dialog, from where you can change symbol properties.

Press the SPACEBAR while in placement mode to rotate the symbol. Rotation is anti-clockwise and in steps of 90°.

Press the X or Y keys while in placement mode to flip the symbol along the X-axis or Y-axis respectively.

Press the '+' and '-' keys (on the numeric keypad) to enlarge or shrink the symbol as you place it.

Notes Any changes made to object properties during placement will cause the default properties for all IEEE Symbol objects to be updated, unless the Permanent option in the Default Primitives tab of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Process Sch:PlaceIEEESymbol

Parameters Symbol=AnalogSignalIn