Availability Schematic Document
(Menu) : Place » Bus Entry
(Toolbar) : Wiring

Description This command is used to place bus entry objects onto the current document. A bus entry is used to connect to or branch from a bus object.

Use After launching the command, the cursor will change to a crosshair and you will enter bus entry placement mode. Simply click or press ENTER to place a bus entry at the cursor position.

Continue placing bus entries or right-click or press ESC to exit bus entry placement mode.

Press the TAB key during placement to edit the object's properties.

Press the SPACEBAR while in placement mode to rotate the bus entry. Rotation is anti-clockwise and in steps of 90°.

Press the X or Y keys while in placement mode to flip the bus entry along the X-axis or Y-axis respectively.

Notes Any changes made to object properties during placement will cause the default properties for the object to be updated, unless the Permanent option in the Default Primitives tab of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Process Sch:PlaceBusEntry